Archive for July, 2017

untitled

If you’ve got multiple computers at your desk, you probably know that it’s a pain to use more than one keyboard and mouse. Here’s how to use a single keyboard and mouse on more than one PC using a tool from Microsoft.

Most geeks will be familiar with Input Director and Synergy, which do the same thing, but now Microsoft has released an application called Mouse Without Borders, which has some great features—like dragging files from one PC to another.

Using Mouse Without Borders

Once you’ve downloaded and installed the application, there’s a quick wizard that helps you setup the application for use on your network. On the first PC, you’ll want to click No to do the initial setup.

sshot-1

This will generate a security code that you can use on the next PC to connect to the first one.

sshot-2

Over on the second PC, you will want to enter the code that you generated on the first PC, and the computer name.

sshot-8

That’s all there is to it – now you can start using the application.

sshot-9

Post originally appeared at:

Please refer the thread for more discussion, this is for reference purpose only.

 

The Visual Studio debugger is a magical beast that can save you loads of time while finding and fixing issues in your application. It is chock-full of tools that can make debugging easier… if you know they exist, and where to find them! Let’s look at 7 lesser known goodies you can use to help you #SuperChargeYourDebugging.

1. Click to Set Next Statement

Many of you may know about the context menu item Set Next Statement (Ctrl+Shift+F10) that moves the yellow arrow (the instruction pointer) to the target line of code. You may also know that you grab and drag the yellow arrow up and down in the gutter to move it. What you probably didn’t know is that as of Visual Studio 2017 version 15,3 Preview there is an even easier way to target a line and Set Next Statement.

1. Hover over the line of code where you want to move the yellow arrow.

2. Hold the CTRL key and notice the Run to Click (Run execution to here) glyph changes into the Set Next Statement glyph.

3. Click on that glyph and the yellow arrow will move to that line.

4. This line will be the next statement to execute when taking a step or pressing Continue (F5).

Set Next Statement

2. Break when a value changes

Have you been in a situation while debugging where you inspect an object’s property at one breakpoint and by the time you get to the next breakpoint that property has changed unexpectedly. You can set a breakpoint on the setter in the class, but this breaks for every instance of the object type! What if you only care about one problematic instance? When debugging C++ code, Data Breakpoints can help you out. If you are debugging managed code, you can use Make Object ID plus a Conditional Breakpoint to narrow your search for the problem area.

  1. When you get to a breakpoint with the interesting instance right click on the object and select Make Object ID. This gives you a handle to that object in memory, referenced by “$1”.
  2. Go to the setter of the property you care about and add a condition to the breakpoint,
    “this == $1”
  3. Press Continue (F5) and now you will break in the setter when that property changes for that instance.
  4. Look at the Call Stack and double click on the previous frame. This will take you to the line of code that is changing the property for this specific instance of the object.

Break when a value changes

Note: The object ID refers to the object’s address in memory and consequently will change with every new debug session. So, if you need to restart debugging, be sure to right click and re-create the object ID. The handle ($1) won’t change, so you can leave your breakpoint as is between debug sessions.

3. Reattach to Process

This is a true time-saver introduced in Visual Stuido 2017 that many of you have yet to discover. It is extremely helpful when you are working on a project where you need to use “Attach to Process” but you find yourself consistently attaching to the same thing session after session.

  1. Start from the Attach to Process dialog (Ctrl+Alt+P) and select the process or processes that you want to debug and click “Attach”.
  2. When you terminate that debugging session go to the Debug menu on the toolbar.
  3. Click Reattach to Process or use shortcut key (Shift +Alt+P).

reattach to process

For more in-depth details about Reattach to Process check out this blog post.

4. Show Threads in Source

Debugging a multithreaded application is rarely easy, but when you can see in the editor what lines of code each thread in currently on, it gets a lot better.

  1. In the debugger toolbar, toggle the button “Show Threads in Source”
  2. A glyph will appear in the breakpoint gutter next to each line of code where at least one thread is currently stopped.
  3. Hover over the thread marker icon to see the thread ids and names for all threads currently stopped on that line of code.
  4. Right click on the thread to see available actions you can perform like freezing and switching the active thread.

Show Threads in Source

Note: This functionality comes with some performance overhead and can feel like it slows down debugging. We recommend turning it off when you aren’t actively using it.

5. Step through one single thread without jumping around

How often are you debugging multithreaded code, when you hit your first breakpoint, take a step, and then suddenly you are stopped with the yellow arrow on another thread? The unexpected behavior comes from the breakpoint still being set and consequently being hit. By default, the debugger will stop on a breakpoint any time it is hit. This means that when you take a step, all threads are allowed to run, and one of your running threads hit this breakpoint before the step completes on your current thread. Next time you get in this situation try this:

  1. Disable or delete the breakpoint that has been hit by the new thread the debugger switched to.
  2. Press Continue (F5)
  3. Observe how your first initial step on that first thread completes and now is the active debugging context.
  4. Since your breakpoints are deleted or disabled, you can continue stepping on that single thread without interruption.

Step through one single thread without jumping around

6. Debug.ListCallStacks -allThreads

When there are lots of threads, there can be lots of call stacks to figure out. You may need to inspect all of them to get a good picture of what state your application is in. You can always see a visual representation of the call stacks for each thread by using the Parallel Stacks window (Debug/Windows/ Parallel Stacks). You can also see a text based, copy/paste-able version of the call stack for each thread using the Command window.

  1. Open the Command Window (View/Other Windows/Command Window).
  2. Type “Debug.ListCallStacks – allThreads
  3. You can also use the popular WinDBG command “~*k
  4. See how each thread is listed with its call stack displayed in the window.

List Call Stacks

7. Side Effect Free Function Evaluation “, nse”

Have you ever innocently typed an expression into the Watch window or Immediate window, then had to deal with the side effects of a debug session where you changed the state of the application without meaning to? Often this can happen when trying to evaluate an expression that calls a function in your program and it causes side effects (state changes to the program without running the actual application). While this may be okay if you know what functions will be called, what if you’re not sure? Here is a way to evaluate expressions in C# without the risk of side effects corrupting your program.

  1. You can add “, nse” (stands for “No Side Effects”) after any expression you type into the Watch window or Immediate window.
  2. This will use a sandbox of sorts that will interpret the expression without causing any side effects.
  3. If the expression can’t be interpreted and can only be resolved by an evaluation, it will show you an error in the window.
  4. If you are sure that you want to evaluate it anyway, remove the “, nse” modifier and try again.

NSE - No Side Effects

The original post appeared here:

http://sqlblog.com/blogs/adam_machanic/archive/2009/04/28/sqlclr-string-splitting-part-2-even-faster-even-more-scalable.aspx

Please visit the original website for more discussion, this is for reference purpose only.

 

using System;
using System.Collections;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;

public partial class UserDefinedFunctions
{
[Microsoft.SqlServer.Server.SqlFunction(
FillRowMethodName = "FillRow_Multi",
TableDefinition = "item nvarchar(4000)"
)
]
public static IEnumerator SplitString_Multi(
[SqlFacet(MaxSize = -1)]
SqlChars Input,
[SqlFacet(MaxSize = 255)]
SqlChars Delimiter
)
{
return (
(Input.IsNull || Delimiter.IsNull) ?
new SplitStringMulti(new char[0], new char[0]) :
new SplitStringMulti(Input.Value, Delimiter.Value));
}

public static void FillRow_Multi(object obj, out SqlString item)
{
item = new SqlString((string)obj);
}

public class SplitStringMulti : IEnumerator
{
public SplitStringMulti(char[] TheString, char[] Delimiter)
{
theString = TheString;
stringLen = TheString.Length;
delimiter = Delimiter;
delimiterLen = (byte)(Delimiter.Length);
isSingleCharDelim = (delimiterLen == 1);

lastPos = 0;
nextPos = delimiterLen * -1;
}

#region IEnumerator Members

public object Current
{
get
{
return new string(theString, lastPos, nextPos - lastPos);
}
}

public bool MoveNext()
{
if (nextPos >= stringLen)
return false;
else
{
lastPos = nextPos + delimiterLen;

for (int i = lastPos; i < stringLen; i++)
{
bool matches = true;

//Optimize for single-character delimiters
if (isSingleCharDelim)
{
if (theString[i] != delimiter[0])
matches = false;
}
else
{
for (byte j = 0; j < delimiterLen; j++)
{
if (((i + j) >= stringLen) || (theString[i + j] != delimiter[j]))
{
matches = false;
break;
}
}
}

if (matches)
{
nextPos = i;

//Deal with consecutive delimiters
if ((nextPos - lastPos) > 0)
return true;
else
{
i += (delimiterLen-1);
lastPos += delimiterLen;
}
}
}

lastPos = nextPos + delimiterLen;
nextPos = stringLen;

if ((nextPos - lastPos) > 0)
return true;
else
return false;
}
}

public void Reset()
{
lastPos = 0;
nextPos = delimiterLen * -1;
}

#endregion

private int lastPos;
private int nextPos;

private readonly char[] theString;
private readonly char[] delimiter;
private readonly int stringLen;
private readonly byte delimiterLen;
private readonly bool isSingleCharDelim;
}
};