All posts tagged dual boot

Needs : Remix OS EFI ISO, Remix OS USB Tool, EasyUEFI, and 8GB Pendrive

Step . 1 : Create partition minimum 8GB (Recommended) with Fat32
Step. 2 : Download Remix OS EFI/UEFI ISO File from http://www.jide.com/en/remixos-for-pc
Step. 3 : Extract With Winrar, you have two file remix os ISO and Remix OS USB Tool
Step. 4: Run Remix OS USB Tool, Connect your Pendrive to Your PC/Laptop and Browse Remix OS File and Choose USB Disk Your Pendrive and Press Okay Button
Step. 5: Wait to Complete process. After complete process close Remix OS USB Tool.
Step. 6: Now open your Pendrive and Copy All File to Your Remix OS Partition (Previously you created in step. 1)
Step. 7: Now Download & Install EasyUEFI setup :

THe installer from there home page might not work. So here’s the link to the version which works flawlessly:

Download from easyuefi here : Link 1 : http://turbobit.net/mh2tosaboslr.html Link 2 : http://www.redbunker.net/yrqiezi1qo8…Setup.rar.html Link 3 : https://cloud.mail.ru/public/39162da…UEFI_Setup.rar  OR http://11.gddx.crsky.com/201509/EasyUEFI-v2.3.zip
Step. 8: Now open EasyUEFI, Click on Add new entry. check this image : http://bit.ly/1K8sVvR
Step. 9: In Type section Choose “Linux or Other OS” check this image : http://bit.ly/1RL5f3a
Step. 10: Type RemixOS (Whatever you want) in Description section. Check this image : http://bit.ly/1nN5heq
Step. 11: Select the target partition section, Select Remix OS Partition
Step. 12: Then Click on Browse Button, then click on + icon > Click on efi + icon > click on boot + icon > select bootia32.efi (for 32bit pc) or bootx64.efi (for 64bit pc) and click on OK button. check this image : http://bit.ly/1KCnmAU
Step. 13: Now close EasyUEFI
Step. 1: Now Shutdown your PC/Laptop and Turn on using Boot Menu Key. There you can select Remix OS. After select Remix OS it will show Guest Mode and Resident Mode.

Congratulations, Now You can run Remix OS

 

This Guide is full walkthrough to how you can Dual Boot your Mac OSX El Capitan and Windows 10 on Hackintosh is very Simpler and Easier .

Using Single HDD / Hard-Drive  it is not difficult and it requires no experience and all basic installation steps are mentioned in this Guide

I assumes you have installed Mac OSX El Capitan on your Hard-Drive but if you haven’t installed it then Please follow below Guide and do installation First ::

1.At least 8 GB USB Drive

2. Windows 10 ISO Image

3. Latest revision of Rufus Download Here 

3. Latest revision of EasyUEFI Download Here

Making or Preparing for Windows10 USB installer 

Step 1: Now Run RuFus app and make sure your USB is Selected or Select it and Select Windows10 ISO Image as in ScreenShots Below ::

Rufus Installation

Step 2 : When Process Complete , Reboot your PC and Boot With USB Drive we prepared .

 Install MicroSoft Windows 10

Step 1 : Now Click on Install Now

Dual Boot Windows1 and OSX El Capitan

Step 2 :Choose your Language /Time/KeyBoard Setting and Click Next

Dual Boot Windows1 and OSX El Capitan 1

Step 3 : Select Custom Install and Look for Unallocated Partition , Choose and Click next , windows will prompt you “this will Create System Partitions ” .

Dual Boot Windows1 and OSX El Capitan 2

Step 4 : Now there will be Partions are as follow :

1.EFI Partition ( 200 MB)

2.OSX Partition (100 GB or more than what space you provided it )

3.MicroSoft Reserved Partition (620 MB)

4. Now Left Partition (320 GB ) Select it and Click Next and wait Untill Installation Complete

Dual Boot Windows1 and OSX El Capitan 3

 

Dual Boot Setting for OSX El Capitan and Windows10 

Now you have Windows But you are not able to Boot to OSX El Capitan due to Missing Boot Entry , now we gonna Fix This ::

Step 1: Run EasyUEFI   and See which Boot Entries are available , now we gonna add Missing Entry for OSX Bootloader ( Clover Bootloader ).

Disk0 is usually the internal Hard Drive / SSD. In the Boot order section, we can see that only Windows Boot Manager is detected. There is no mention of Clover UEFI anywhere.

EasyUEFI Setting

Step 2: To solve this problem, click on the Add button (the second button you see on the right).

EasyUEFI Settings 2

Step 3: Now Change Type fromWindows BootManager to Linux or Other OS , Type Name in Description Box (Whatever you want Clover Bootloader or Mac OSX Bootloader or Else depends upon you),  and Click Browse Button

EasyUEFI Settings 3

Step 4:  Now Expand EFI => BOOT or CLOVER Folder , Select any of Bootx64.efi or Cloverx64.efi  , Both are Clover Bootloader files Choose one or add Entry for Both but one is Enough to Boot Clover then why you waste your time but if you having Issue with and Then Use Another Option.

EasyUEFI Settings 4

Note : Remember these things :

1.Bootx64.efi is Bootloader file (this file is from Clover Bootloader )

2.Bootmgfw.efi is Windows Bootloader

3.Cloverx64.efi is Clover Bootloader

initially when we Click on drive to Boot it loads Bootx64.efi First then Required Files to Boot to OS (Operating System) . Every OS Contains it Bootx64.efi , Windows and Linux too . above Bootx64.efi is from CloverBootloader but anyhow your file is got Replaced with particular OS then Bootx64.efi will load that OS only .Clover is capable of running any OS.

But Don’t Worry use Above Bootloader Files to Boot to OS what you want .

Now Everything is done and you have Successfully added Boot Entry for OSX El Capitan in BIOS , Just Select This Entry and Boot to OS you want .

You will See Boot Menu Like This :-

Asus UEFI BootMenu

Also You can Set you OS’s Priority . you will see like This :-

Asus UEFI BIOS

Additional Workarounds :

These Following Steps i used to Format my Single HDD to Dual Boot in Mac OSX DiskUtility .

OSX El Capitan DiskUtility is not providing option to set you HDD as Free Space (as we were have in Yosemite or before OSX Version)

i have HDD (500 GB ) 250 GB for OSX El Capitan  and 250 GB for Windows 10 .

if you set you HDD first 250GB as Mac OSX and Second 250 GB as FAT32 or ExFat , This Way OSX WIll make Format your HDD as Hybrid GPT , there’s only way to Format you HDD as OSX Journaled to get Full GPT Drive .

Window 10 Can’t be Install on HyBrid GPT Drive you will Receive this Error Continously :-

Windows Error

Solution to This Error :-  

1 :  I Used Mac OSX Yosemite USB installer and Fomatted My HDD as

First 250GB for OSX  formatted as OSX Journaled and Left 250 GB as Free Space .

Free Space will be as Unallocated Space in Window10 Installation Disk Management

2 : You Can use GptFDisk to Convert your Hybrid GPT Drive into Pure or Full GPT then Windows Installation Can Proceed .

Pure/Full GPT Disk will look like :-

GPT FDISK

Above Screenshot is from Gdisk you can use Partition Manager Softwares on Windows as well as OSX to Determine Drive is Full GPT or Hybrid GPT .

Note : In My Case i was not able to Convert Hybrid GPT Disk using GDisk , receiving too many error then i used solution 1 , which is much Easier .

Things to be Remember Always Before Dual Boot:-

1. Always Install Install OSX First on HDD , Don’t try to Install Windows First .

2.EFI Partition is Required for UEFI Bios System , if EFI is not Present then it not Booting UEFI is using Legacy Boot.

3.Disable Secured or Set it to Other OS in Bios Menu , otherwise you won’t able to Boot from any OS then Windows .

Never try to Install Windows First Because Windows always make first partition as OEM (100MB), Second EFI (100 MB) and Third MSR (620 MB ).

OSX always Requires EFI to be First Partition and of (200 MB) at least of Size , otherwise you will Receive this Error Continuosly . Error will look like this :-

MEDiaKit reports partition (map) too small - Error

PS: This Guide is not only for Dual Booting With OSX El Capitan with Windows10 , you can Dual Boot any Version of OSX and Windows (UEFI Support ) on Single Hard Drive using This Method .